MOBILE RADIOS
SDM730 DMR MOBILE RADIO
DESCRIPTION
The SIMOCO Xd SDM730 is a digital mobile radio terminal capable of operating across multiple modes, including analogue conventional, digital conventional (DMR Tier II), and digital trunking (DMR Tier III).
Best in class sensitivity ensures crystal-clear communications in fringe areas and harsh environments while features including full duplex calling capabilities, allow for enhanced communications between office and field staff. Additional features include a large TFT Screen, Bluetooth functionality, GPS and a rich Application Programming Interface (API) capable of delivering third party applications into the hands of your operational teams.
KEY FEATURES
CALL TYPES
Radio to radio and radio to/ from dispatch
Group Call
Radio to group or dispatcher to group
Analogue PABX/ DTMF + Over dial
DTMF dialling plus onward dial through extensions/ automated reception options
Call to PSTN
Terminals can call PSTN numbers via the PABX
SIP PABX Call
Radio to/ from PABX via SIP interface
Short Data Messaging
Text message to/from radios and/or dispatch
Status Messaging
Send pre-scanned messages quickly over the air via (short code digits) menu
All Call
Call to all devices on a network from radio or dispatch with all PTTs disabled
Full Duplex DMO Calls
Radio to radio calls in full duplex mode
CONVENIENCE
Supports Global Positioning System
Bluetooth
V4.0, can be used with BT device for audio plus BT PTT Accessory available and BT Palm Microphone for vehicle installs
Noise Reduction
Software activated in device
Real time clock and Calendar
Displays date and time in menu bar
French Language
French GUI
Missed Call List
Missed calls can be called back from the list via the PTT
Call Diversion
User can set divert incoming to another radio ID
Dial String Call Modifiers
Use Dial Strings to modify call types or status messages – includes auto detect telephone dialling
WORKER SAFETY NEEDS
User can set – If idle, radio prompts for response at pre-programmed intervals – radio raises emergency call on pre-configured criteria
Duress Call
Can be alarm and/or call – configurable hot mic. duration/tone – can use Priority Interrupt
Emergency Call Indication
Receiving radio can be set to visually indicate when a call is an Emergency Call
Call Alert
Radio emits a loud tone until acknowledged by user
Radio Check
Supplementary feature used by authorised radios to determine whether a particular target radio is switched on with in coverage and active
Radio Monitor
Supplementary service which enables suitably authorised radios to remotely enable the microphone of target radios for a predefined period of time
HIGH SECURITY
Authentication of a device upon registration to a network or on stun/ revive commands
Stun / Revive / Kill
Stun, revive and/ or kill a radio from an authorised user radio or dispatch
Enable/ Revive
Similar to stun and revive
Encryption
AES Encryption 256 bit
MANAGEMENT OF NETWORK AND RADIO FEATURES
Terminals support over the air reprogramming (OTAP)
Enhanced Subscriber Management
Enhanced management of subscribers configuration and feature control for network operators
Multi Site Roam Terminals hunt for strongest signal and can roam between sites
Group Presence Check
For group calls, only the sites where group members are registered at the time are involved in the call
Mixed Mode Scanning
Increased network availability and access to mixed digital and analogue channels – Terminals are programmed with scan lists and a scan list can then be assigned to a channel
GENERAL
Analogue conventional, digital conventional (DMR Tier II), and digital trunking (DMR Tier III)
Frequency Bands
Available in VHF and UHF frequency bands
RF performance
Exceptional RF performance – exceeds ETSI and TIA-603 specifications
Display
71mm Transflective TFT LCD display
Compliance
Fully compliant with ETSI DMR standards
MIL STD and IP Rating
MIL-STD-810 & IP54
Audio Output
Market leading 1.8W audio output
Receiver sensitivity
-121dBm receiver sensitivity (typical) – increase coverage area and improve audio quality
HOW IT WORKS
The SDM730’s ability to allow the user to operate across a variety of network signature modes means it is not only a safe and future-proof investment, but also provides a cost effective and flexible migration path for organisations managing the transition from analogue to DMR digital.
TECHNICAL SPECIFICATIONS
Frequency Bands:
VHF:136–174MHz
UHF:400–470MHz
UHF:450–520MHz
Channel Capacity:
1024
Channel Bandwidth:
12.5/25kHz
Dimensions (H x W x D):
60 x 174 x 190mm
Weight:
1500g
LCD:
71 mm TFT LCD (320×240 pixels, 262k colors)
Operating Voltage:
DC 13.6V Nominal
DC 10.5-16V Extreme
Current Drain (Transmit):
8.7A (45W)
7A (25W)
4A (5W)
Model Variant:
SDM730 25W/45W without GPS
SDM730 25W/45W with GPS
SDM730 25W/45W with GPS, Full Duplex & Bluetooth
(45W model only available in regions where local regulations allow)
0.5ppm
RF Power Output:
Selectable levels; 45/25/5 W (45 W model) or 25/5 W (25 W model)
Digital Modulation:
7K60FXD (Data Only)
7K60FXE (Data and Voice)
Analogue Modulation:
16K 0F3E @ 25kHz
11K 0F3E @ 12.5kHz
Adjacent Channel Power:
70dB @ 25kHz
60dB @ 12.5 kHz
Conducted and Radiated Emission:
-57dBm (<1GHz)
-47dBm (>1GHz)
Transmission Deviation Limits:
5kHz @ 25kHz
2.5kHz @ 12.5kHz
Audio Distortion:
3% Analogue 5% Digital
Hum and Noise:
48dB @ 25kHz Analogue
42dB @ 12.5kHz Analogue
55dB @ Digital
Audio Response:
+1 ~ -3dB
Digital Sensitivity:
Typical: -121dBm / BER 5%
Typical: -118dBm / BER 1%
Analogue Sensitivity:
Typical: -121dBm / 12dB SINAD
Intermodulation:
>75dB (TIA603) >70dB (ETSI)
Blocking:
>95dB (TIA603 & ETSI)
Spurious Response Rejection:
75dB (TIA603 & ETSI)
Adjacent Channel Selectivity:
70dB @ 25kHz (TIA603&ETSI)
60dB @ 12.5kHz (TIA603&ETSI)
Conducted Spurious Emission:
75dB (TIA603 & ETSI)
Rated Audio Power Output:
5W (Full Duplex)
6.2W (Half-Duplex)
Rated Audio Distortion:
3% Analogue 5% Digital
Hum and Noise:
48dB @ 25kHz Analogue
42dB @ 12.5kHz Analogue
55dB @ Digital
Audio Response:
+1 ~ -3dB
Digital Vocoder Type:
AMBE+2
Digital Protocol:
ETSl-TS102 361 -1, -2,-3,-4
-30 – +60ºC
Storage Temperature:
-40 – +85ºC
Dust and Water Intrusion:
IP54
Humidity:
MIL-STD-810 C/D/E/F/G Standard
ESD
IEC 61000-4-2(1evel 4)
±8KV(Contact). ±15KV(Air)
<120s
Tiff Hot Start:
<10s
Horizontal Positioning Accuracy:
<10s
Acquisition Sensitivity:
<-140dBm
Tracking Sensitivity:
<-152dBm
